DIY Garden Hose Holder: A Step-by-Step Tutorial

A garden hose is one of the most essential tools in any gardener's arsenal. It allows you to water your plants and keep your garden looking lush and healthy. However, storing your garden hose can be a challenge, especially if you don't have a proper hose holder. A garden hose left lying around can be unsightly and can get tangled, making it difficult to use. In this tutorial, we will show you how to make a DIY garden hose holder that will not only keep your hose organized but also add some charm to your outdoor space.

Materials Needed

• 1 - 4x4x8 pressure-treated lumber
• 1 - 1x6x8 pressure-treated lumber
• 2 - 2x4x8 pressure-treated lumber
• 1 - 5/8 inch diameter x 24 inch rebar
• 1 - 3 inch diameter PVC pipe
• 1 - 2 inch diameter PVC pipe
• 1 - PVC cap
• 2 - PVC elbows
• 1 - Can of outdoor spray paint
• Box of wood screws (2 1/2 inch)
• Box of wood screws (1 1/4 inch)
• Drill
• Saw
• Tape measure
• Pencil

Step 1: Cut the Wood

First, you need to cut the pressure-treated lumber to the following measurements using a saw:

• 4x4x8 pressure-treated lumber - Cut into two 18-inch sections and one 24-inch section
• 1x6x8 pressure-treated lumber - Cut into one 24-inch section
• 2x4x8 pressure-treated lumber - Cut into two 18-inch sections and two 10-inch sections

Step 2: Assemble the Base

Take the two 18-inch sections of 4x4x8 pressure-treated lumber and attach them to the two 10-inch sections of 2x4x8 pressure-treated lumber using 2 1/2 inch wood screws. Use two screws for each joint. Repeat for the other two corners to create a square base.

Step 3: Attach the Uprights

Take the two 18-inch sections of 2x4x8 pressure-treated lumber and attach them vertically to the base using 2 1/2 inch wood screws. Use two screws for each joint. Make sure the uprights are evenly spaced and perpendicular to the base.

Step 4: Add the Crossbar

Take the 24-inch section of 4x4x8 pressure-treated lumber and attach it horizontally to the top of the uprights using 2 1/2 inch wood screws. Use two screws for each joint. This will serve as the crossbar for the hose holder.

Step 5: Add the Hose Guide

Take the 3 inch diameter PVC pipe and cut it to a length of 4 inches. Attach one PVC elbow to each end of the pipe. Then, attach one end of the PVC elbows to the top of the crossbar using 1 1/4 inch wood screws. This will serve as the hose guide for the holder.

Step 6: Add the Rebar

Take the 5/8 inch diameter x 24 inch rebar and hammer it into the ground next to the hose holder. The rebar should be at an angle, with the top leaning towards the hose holder. Make sure it is firmly in place.

Step 7: Add the PVC Pipe

Take the 2 inch diameter PVC pipe and cut it to a length of 6 inches. Attach the PVC cap to one end of the pipe. Then, attach the other end of the pipe to the top of the rebar using 1 1/4 inch wood screws. This will serve as the holder for the end of the garden hose.

Step 8: Paint the Hose Holder

Once the hose holder is assembled, you can paint it to match your outdoor decor. Use an outdoor spray paint that is suitable for wood and follow the instructions on the can. Let the paint dry completely before using the hose holder.

Step 9: Attach the Garden Hose

To use the hose holder, simply attach the end of your garden hose to the PVC pipe on top of the rebar. Then, wrap the hose around the holder and guide it through the PVC elbows. This will keep your garden hose neatly organized and ready to use.

Conclusion

Making your own DIY garden hose holder is a great way to keep your garden hose organized and add some charm to your outdoor space. With just a few pieces of pressure-treated lumber, PVC pipe, and some basic tools, you can create a hose holder that is both functional and stylish. Follow the step-by-step tutorial above to create your own DIY garden hose holder and enjoy a more organized and beautiful garden.

05.06.2023. 12:03